PDA

View Full Version : Turbo Install complete!

Scrapy
December 17th, 2008, 12:29 PM
Well almost. still need tp purchase an intake pipe for it. it is a 60trim turbo i my 90 GSX.

http://i193.photobucket.com/albums/z181/Scrapymetaldsm/newsteup.jpg
EvoJoe
December 17th, 2008, 07:04 PM
sweeeeeeeeet!!!!!!!!
91240kat
December 18th, 2008, 03:10 AM
How much boost are you going to run?
Rob222
December 18th, 2008, 11:18 AM
looks good
Scrapy
December 18th, 2008, 12:51 PM
Ket. I plan on running 20 pounds at first, But I'll preobably go down a few since Im on stock motor. I ran 23psi on my 20g, but this one being a lot bigger, I will drop it some.
EvoJoe
December 18th, 2008, 10:23 PM
what kinda numbers u plannin on puttin down with this?
Speed JUnkyz
December 18th, 2008, 10:30 PM
What are the supporting mods first!
Scrapy
December 18th, 2008, 11:48 PM
Supporting mods::
Spearco FMIC
650's
255 Pump
2g mas
SAFC2
Tial 40mm wastegate
EVO3 exhaust manifold

Plus lots of smaller but equally important stuff

My HOPES are for 425 on the stock 7 bolt block at 18-20 PSI. We will see though, I need to compression test because Im worried this motor didnt like the last 13.0 pass it had to run. I got excessive blow-by and now smoke coming out the VC vent and that means = bad rings!! :(
EvoJoe
December 19th, 2008, 08:25 AM
uh oh!!!